Plan linear cuts and see how stock length is divided between finished parts, saw cuts, end trim and leftovers.
Your input
Outputs are cleared when the input changes.
Result
Enter your data or use the example, then run the tool.
Worked example
1000 mm stock with 600 and 394 mm parts plus 3 mm kerf per part fits in one stock; 600 and 400 requires two.
Method
Place the longest parts first, using the first stock length with enough space. Deduct the combined end trim from each stock. Deduct one full blade width for every finished part, including the last part cut from a stock.
Limits
The arrangement may not use the fewest stocks. Each batch uses one material and stock length, with at most 500 parts after quantities are expanded. The SVG is a scaled illustration, not a full-size cutting template.
Your inputs stay on this device. Only optional, consented page visits are measured. Input values, files, filenames and processing logs are not sent to Analytics.
When switching languages, text, settings and selected files are temporarily kept on this device. Transfers are removed after restoring; interrupted transfers are cleaned up on a later visit. Inputs and files are never uploaded.